Installing The Ink Cartridge - Pitney Bowes SendPro C Auto Operator's Manual

3. Remove the moistener bottle and place it with the cap up on a flat surface.
4. Unscrew the moistener bottle cap and fill it with Pitney Bowes E-Z Seal®. Do not overfill the
moistener bottle.
5. Screw the cap back on and place the bottle back in its original location (upside down in the
machine).
6. Close the feeder access cover.
7. If the tank is empty, allow 30 minutes for the moistener brush and wick to get completely saturated.

Installing the ink cartridge

1. Tap the Settings (gear) icon in the global toolbar.
2. Scroll down and tap Mail Printer Maintenance or Envelope Printer Maintenance.
3. Tap Install Ink.
4. Lift the cover. The ink cartridge moves to the front position.
5. Remove the ink cartridge, as shown on the label next to the cartridge holder.
6. Insert the new ink cartridge and close the cover. The cartridge repositions itself and the Envelope
Pitney Bowes Operator Guide November 2019
Quick start guide
24