Sending A Lettermail™ Envelope; Printing Postage On Tapes - Pitney Bowes SendPro C Auto Operator's Manual

Printing on envelopes
Sending a Lettermail™ envelope
1. Tap Print on Envelopes.
2. If you have the accounting feature enabled on your machine:
a. Tap Account on the left side of the screen.
b. Select an account.
3. Tap Class.
4. Tap Start Over to display a list of all the available classes.
5. Tap Domestic Lettermail for a Lettermail envelope.
6. Tap Standard.
7. Tap Apply.
With a scale:
l
i. Place the envelope on the scale.
ii. The weight appears in the weight button on the screen.
Without a scale:
l
i. Tap the weight button.
ii. Enter the weight of the envelope.
iii. Tap Apply.
8. Tap Extra Services.
9. Select any special services required.
10. Tap Apply.
11. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have,
feed the envelopes manually or tap Start to feed the envelopes automatically .
Note: If you have previously printed any envelopes, you may get a message that transactions are
being uploaded. Once the upload completes, you see the message "Transaction upload status, Upload
success" with a check mark. Tap the check mark.

Printing postage on tapes

1. Push the tape lever to the right (a) and hold it there. Drop a stack of strip tapes (b) down into the
slot. Make sure the printable side faces to the right (toward the touch screen).
Pitney Bowes Operator Guide November 2019 65