Printing A Future Date - Pitney Bowes SendPro C Auto Operator's Manual

2. Tap Print on Envelopes on the Home screen.
3. Set the appropriate postage mode and conditions (account, class and special service, weight)
using the Envelope Printing screen
4. For a single tape, tap the Tape button. The default value is set to 1 tape.
For multiple tapes, set the number of tapes by tapping the number on the tape button and
l
entering the number using the keypad.

Printing a future date

You can print postage with a date in the future. If you miss today's mail pickup, you can print your postage
with a future date.
1. Tap Print on Envelopes on the Home screen.
2. Tap the date on the Envelope Printing screen. The calendar displays.
3. Tap Tomorrow or Another Date on the right-hand side of the calendar, depending on the date
you wish to print.
4. Tap Apply when you see the future date highlighted on the calendar.
5. The Envelope Printing screen displays the future date.
6. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you have,
feed the envelopes manually or tap Start to feed the envelopes automatically .
Note: The date on the postage should match the date when your mail goes to the post office. Your
machine automatically advances the printed date on the meter stamp (as well as its internally held date)
when the system time reaches 5:00 PM. This time cannot be changed.
Pitney Bowes Operator Guide November 2019
Printing on envelopes
66