Feeding Envelopes On Your Sendpro C Auto - Pitney Bowes SendPro C Auto Operator's Manual

Quick start guide

Feeding envelopes on your SendPro C Auto

1. Shingle the envelopes (slant the stack as shown) so the bottom envelope feeds first. All envelopes
in a single stack should be the same size.
2. Place the stack of mail on the feed deck. Place the envelopes with the flap side facing down and
the top edge against the rear wall.
3. Leave about 3 mm space between the stack and the side guide to ensure the stack feeds without
resistance.
Pitney Bowes Operator Guide November 2019 15