Table of Contents
Advertisement
5. If you need to change any fax settings, select Fax Settings and select your settings.
6. If you want to preview your fax in black-and-white on the LCD, press the
preview looks incorrect, select Cancel, reposition the document or change the fax settings, and
repeat this step.)
Note: If you do not touch the preview screen for 20 seconds, your product sends the fax
automatically. You cannot preview images when the Direct Send setting is turned on.
7. If you want to save your fax settings for later use, select Presets and add a new entry.
8. Select the
Note: To cancel faxing, select the
status from the Job/Status menu.
Your product scans your original and prompts you to place additional pages, if necessary.
After scanning your originals, your product dials the number and sends the fax.
Note: Your product does not save sent color faxes to its memory. If the Save Failure Data option is
enabled, faxes that failed to be sent are stored to the product's memory and you can resend them from
the Job/Status menu.
Parent topic:
Related references
Fax Sending Options
Related tasks
Using Presets
Selecting the Line Type
Related topics
Placing Originals on the Product
Setting Up Contacts and Contact Groups
Fax Sending Options
While sending a fax, you can select Fax Settings and select these options.
Send icon.
cancel button. You can also cancel the job or check the job
Sending Faxes from the Product Control Panel
290
Preview icon. (If the
Advertisement
Table of Contents
