Table of Contents
Advertisement
Parent topic:
Related tasks
Placing Originals in the Automatic Document Feeder
Cleaning the Automatic Document Feeder
Paper Jam Problems
If a paper jam occurs in the product, a message appears on the LCD screen. Follow the on-screen
instructions to locate the paper jam and remove the paper.
If any torn pieces of paper remain inside the product, select Settings > Maintenance > Remove Paper
after clearing the paper jam error.
Parent topic:
Paper Ejection Problems
If you have problems with paper ejecting properly, try these solutions:
• If paper does not eject fully, you may have set the wrong paper size. Cancel printing to eject the paper.
Select the correct paper size when you reprint.
• If paper is wrinkled when it ejects, it may be damp or too thin. Load new paper and be sure to select
the correct paper type setting when you reprint.
Parent topic:
Solving Problems Printing from a Computer
Check these sections if you have problems while printing from your computer.
Nothing Prints
Product Icon Does Not Appear in Windows Taskbar
Printing is Slow
Parent topic:
Nothing Prints
If you have sent a print job and nothing prints, try these solutions:
• Make sure your product is turned on and connected to your computer.
• Make sure any interface cables are connected securely at both ends.
Solving Paper Problems
Solving Paper Problems
Solving Paper Problems
Solving Problems
396
Advertisement
Table of Contents
