Epson WorkForce Pro WF-C879R User Manual page 374

Hide thumbs Also See for WorkForce Pro WF-C879R:
Table of Contents

Advertisement

LCD screen message
Printer error. Turn the power off and
on again. If the problem persists,
contact Epson support.
Printer error. Contact Epson support.
Non-printing features are available.
Printer error. For details, see your
documentation.
Paper out in XX. Load Paper. Paper
Size: XX/Paper Type: XX
Too many paper cassette units are
installed. Turn the power off and
uninstall the extra units. See your
documentation for details.
Unsupported Paper Cassette Units
have been installed. Turn the power
off and uninstall. For details, see
your documentation.
Cannot print because XX is out of
order. You can print from another
cassette.
Condition/solution
Turn the product off and then back on again. If the error persists,
check for and remove any jammed paper or protective materials
from the product. If the error still persists, contact Epson for
support.
If you see any of the following error codes, make sure you have
not exceeded the loading capacity for any paper source:
• 000181
• 000184
• 000201
• 000204
• 000221
• 000224
The product may be damaged, but features such as scanning
are still available. Contact Epson for support.
The product may be damaged. Contact Epson for support.
Load the size and type of paper in the paper source indicated.
You can install up to three optional paper cassette units.
Remove any extra units.
Unsupported optional paper cassette units are installed.
Remove the unsupported units.
Turn the product off and then back on again. Reinsert the
indicated paper cassette. If the error persists, contact Epson for
support.
374

Advertisement

Table of Contents
loading

Table of Contents