Table of Contents
Advertisement
3. Insert the Ethernet board firmly into the interface slot and tighten the screws.
Caution: Do not remove the cover or touch the back of the Ethernet board.
4. Connect the power cord and other connection cables, then plug in the product.
5. Turn on the product.
6. Press the
7. Press the
8. Select Settings > General Settings > System Administration > Firmware Update > Update to
update the firmware.
Parent topic:
Related references
Optional Accessories and Replacement Parts
Product Parts Locations
See these sections to identify the parts on your product.
Product Parts - Front and Inside
Product Parts - Top and Back
Product Parts - Back
Job/Status button, select Options, and make sure the Ethernet board appears.
home button to return to the home screen.
Installing or Using Optional Parts
37
Advertisement
Table of Contents
