Table of Contents
Advertisement
• If there are gaps or the pattern is faint, select X and continue.
• If there are many lines missing, you should run a Power Cleaning.
8. Follow the instructions on the screen to clean the print head, check the nozzles, and repeat the
process as necessary.
Caution: Never turn off the product or open the front cover during a cleaning cycle or you may not
be able to print.
If you don't see any improvement after cleaning the print head up to 4 times, wait at least 6 hours without
printing. Then try cleaning the print head again. If quality still does not improve, one of the ink packs may
be old or damaged and needs to be replaced. You can also try running a Power Cleaning.
Parent topic:
Related tasks
Cleaning the Print Head Using the Product Control Panel
Power Cleaning Using the Product Control Panel
Loading Paper in the Paper Cassettes and Rear Paper Feeder
Cleaning the Print Head Using the Product Control Panel
You can clean the print head using the control panel on your product.
Note: You cannot clean the print head if ink is expended, and may not be able to clean it when ink is low.
You must replace the ink pack first.
1. Make sure there are no errors on the LCD screen.
2. Load a few sheets of plain paper in the product.
3. Press the
4. Select Settings > Maintenance > Print Head Cleaning.
Print Head Maintenance
home button, if necessary.
349
Advertisement
Table of Contents
