Lubricating The Hook - DURKOPP ADLER 911-211-10 Operating Instructions Manual

6.2.2 Lubricating the hook

The approved oil quantity for hook lubrication is a factory specification.
Proper setting
1. Hold a piece of blotting paper next to the hook (1) while sewing.
 After sewing a stretch of approx. 1 m, the blotting paper will have
Fig. 61: Lubricating the hook
(1) - Hook
To lubricate the hook:
1. Turn the screw (2):
Important
The released amount of oil does not change until the operating time has
run a few minutes. Sew for several minutes before you check the setting
again.
92
been sprayed with a thin and even film of oil.
①
• more oil: turn counterclockwise
• less oil: turn clockwise
(2) - Screw
Operating Instructions 911-211-10 - 00.0 - 10/2020
Maintenance
②