Programming
6. Select the desired technology operation(s) for the new seam path
7. Confirm the selection with OK.
You are returned to the detail window with the modified contour.
8. Press the Next button.
A query dialog is displayed, asking if you wish to adopt the changes.
Important
Always perform a contour test after modifying a contour to ensure that the
new seam path lies within the permissible sewing field ( p. 56).
Changing seam program parameters
You can change the general settings that apply to the entire seam
program.
To change the seam program parameters:
1. Press the menu items
The window for selecting the program parameter group appears:
Fig. 43: Changing seam program parameters
2. Press the desired parameter group.
The individual parameters of this group are displayed.
3. Press the desired parameter.
The window for modifying the parameter value opens.
4. Set the parameter to the desired value ( p. 44).
Operating Instructions 911-211-10 - 00.0 - 10/2020
( p. 40).
Confirm the prompt with YES to save the modified contour.
Edit
Seam program
>
Parameters
>
.
59