DURKOPP ADLER 911-211-10 Operating Instructions Manual page 72

Overview of the individual machine parameters
70
MP1 - Configuration
Symbol Meaning
Needle cooling
The following options can be set:
• Without: No needle cooler activated.
• Air cooling (Def.): The needle is cooled with air while sewing the seam
• Ice cooling: Optional equipment
Sewing foot mode
The sewing foot can be operated in the following modes:
• Jumping foot: The sewing foot only presses on the sewing material
while the needle is in the sewing material
• Presser foot: The sewing foot presses continuously on the sewing
material
Sewing field size
Take care to ensure a valid sewing field size for your subclass when
making the selection! (See chapter Technical data ( p. 119))
• Normal sewing field (Def.): A sewing field of up to 200 x 300mm is
available
• Extra-large sewing field: A larger sewing field can be used in
conjunction with the alternating clamps
Optional equipment
• Reduced clamp pressure: Optional equipment limiting the amount of
clamp pressure to allow for better alignment on insertion.
• Neat seam beginning: Optional equipment, activates stitch position
optimization ( Additional Instructions Stitch Position Optimization)
• Marking lamps: Optional equipment providing orientation lines on
insertion for easier alignment. Up to 4 marking lamps can be switched on
for each program. This setting only activates the option, the actual
switching is defined in the program parameters (see Marking
lamps( p. 61))
• Barcode scanner: Optional equipment for performing a safety check
before sewing. A barcode can be stored with each program. Agreement
with the barcode on the clamp is checked. Sewing only proceeds when
the barcodes agree. You enter the barcode ID in the program parameters
(see Clamp ID code ( p. 60)).
Clamp type
The following clamp types are available:
• Single clamp: One-piece parallel clamp with angle mount
• Single clamp with hanger (Def.): One-piece parallel clamp with hanger
mount
• Double clamp: Two-piece parallel clamp with angle mount
• Alternating clamp: Removable clamp
• Special clamp: Special clamp
Clamp limitation
• Preset limitation (Def.): No additional structures are taken into account
• Special limitation: Individual limits are taken into account
Operating Instructions 911-211-10 - 00.0 - 10/2020
Programming