Setup
Fig. 69: Assembling the reel stand (2)
(5) - Centering piece
(6) - Centering taper
4. Remove the centering piece (5), the centering taper (6) and the foam (7)
5. Place the plastic cylinder to keep the threads of the two thread reels
6. Refit the foam (7), the centering taper (6) and the centering piece (5).
Fig. 70: Assembling the reel stand (3)
(1) - Reel stand
(8) - Screw
7. Attach the holder of the hose guide (10) to the reel stand (1) using the
Operating Instructions 911-211-10 - 00.0 - 10/2020
⑤
⑥
at one of the thread reel holders.
from becoming twisted.
⑧
⑨
screw (8) and the nut (9).
⑦
(7) - Foam
①
⑩
(9) - Nut
(10) - Hose guide
101