DURKOPP ADLER 911-211-10 Operating Instructions Manual page 118

Error
code
8801
8805
8806
8890
8891
System
9000
9002
9006
9016
9100
9601
9700
9701
9900
9901
9902
116
Description
Error in test pins/signal processing/
event processing/
Memory wrapper/
list functions
Internal error
Reference run active
Machine head not locked down
Quick-stop switch is activated.
Wrong bar code ID
The counter has not reached the
default value.
Stop while sewing on the contour
Continue sewing?
Bobbin case retainer for bobbin
change not closed
Parallel clamps not lowered
Incorrect machine parameters
Incorrect sequences
Incorrect program parameters
Troubleshooting
Troubleshooting
• Switch off and on the machine
• Software update
• Notify DA Service
Lock down machine head
Releasing the quick-stop switch
Change the program
Press the OK button. The counter is
reset.
• OK button =
Continuing the sewing process
• ESC button =
Canceling the sewing process
Close the bobbin case retainer for
bobbin change
• Remove obstacles
• Align sensors
Initialize the data
Initialize the data
Initialize the data
Operating Instructions 911-211-10 - 00.0 - 10/2020