DURKOPP ADLER 911-211-10 Operating Instructions Manual page 117

Troubleshooting
Error
code
6551
6554
6651
6653
6751
6761
6952
Communication
7801
8151
8156
8159
8154
8252
8257
8258
8256
8254
8351
8400
8401
8402
8403
8404
8407
8408
8411
8414
Operating Instructions 911-211-10 - 00.0 - 10/2020
Description
Error in machine head position/AD
converter/process error
Internal error
Stepper motor driver error
Internal error
Control panel interface communication
• Cable disturbance
• Cable
IDMA error
• Disturbance
• Control defective
8152 IDMA error
• Internal error
ADSP Boot/Xilinx Boot/ Boot error
Disturbance
Test pins error
Control panel has no valid program for
the DAC.
Control panel has no valid program for
the DAC.
Program in DAC is no longer current. Load the current program into the
DAC update was faulty.
Waiting for a DAC reset.
DAC program check is active.
DAC update succeeded.
Troubleshooting
• Switch off and on the machine
• Software update
• Notify DA Service
• Switch off and on the machine
• Software update
• Notify DA Service
• Switch off and on the machine
• Software update
• Notify DA Service
• Switch off and on the machine
• Replace control
• Switch off and on the machine
• Software update
• Notify DA Service
• Switch off and on the machine
• Switch off and on the machine
• Software update
• Notify DA Service
Load the current program into the
control panel from a USB key.
Load the current program into the
control panel from a USB key.
DAC.
• Attempt the update again
• Check cable connection
• Replace the DAC
Wait until the restart has been
performed
(Duration: several seconds).
Wait until the test has been performed
(Duration: several seconds).
115