Important
Remove the thread from the needle and the thread lever before starting
the test.
2. Press the
The window for entering the speed opens.
3. Enter the desired value (300 - 2000 rpm).
4. Press the
The window for entering the cutting speed opens.
5. Enter the desired value (70 - 500 rpm).
6. Press the
The sewing motor runs at the entered speed.
7. Press the
The sewing motor stops.
8. Press the
The sewing motor runs at the entered speed.
9. Press the
The sewing motor stops, and the thread trimmer is actuated.
5.13.4 Calling up log displays and error lists
You can access the log settings and error lists via
System information
To call up log displays and error lists:
1. Press the menu items
The selection screen for system information appears.
Fig. 55: Calling up log displays and error lists
82
button.
button.
button.
button.
button.
button.
information
.
Extras
.
Extras
>
Service
Operating Instructions 911-211-10 - 00.0 - 10/2020
Programming
>
Service
>
>
System