Front-Eject Board, Front-L Board; Front Board - Sony MAP-S1 Service Manual

MAP-S1
2-7.

FRONT-EJECT BOARD, FRONT-L BOARD

qs FRONT-L board
0 screw
B
(BVTP2.6)
C
A
0 screw
(BVTP2.6)
6 flexible flat cable (26P)
(CN4803)
5 flexible flat cable (23P)
(CN4806)
2-8.

FRONT BOARD

Note 1: When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
1 flexible flat cable (19P)
(CN4401)
2 two screws
(BVTP2.6)
16
2 flexible flat cable (14P)
(CN4801)
1 flexible flat cable (8P)
(CN4802)
7 flexible flat cable (5P)
(CN4804)
0 screw
(BVTP2.6)
9 FRONT-EJECT
board
8 two screws
4 flexible flat cable (9P)
(CN4807)
NG
Insert at a slant.
flexible flat
cable
colored line
connector
5 cushion (FL)
6 FRONT board
5 cushion (FL)
3 flexible flat cable (19P)
qa boss
C
B
Note: When installing the flexible flat cable, ensure that
the colored line is parallel to the connector after insertion.
OK
Insert straight into the interior.
flexible flat
cable
colored line
connector
4 Remove the FRONT board block
in the direction of the arrow.
3 two claws
Note 2: When installing the FRONT board, be sure to confirm that
the FRONT board has fitted into these two claws firmly.
(CN4805)
qa boss
A
– Panel (front) rear bottom view –
NG
Insert at a slant.
flexible flat
cable
colored line
connector
– Panel (front) rear bottom view –