Note: Follow the disassembly procedure in the numerical order given.
2-2.
PANEL (SIDE L/R)
4 panel (side R)
1 two screws
(flat head)
3 two claws
2-3.
PANEL (FRONT) BLOCK-1
• Continued on 2-4 (page 14).
1 two screws
(ornament)
1 screw
(ornament)
– Rear bottom view –
4 panel (side L)
2 Remove the panel (side R)
in the direction of the arrow.
1 two screws
(flat head)
1 screw
(ornament)
4 claw
4 claw
– Rear view –
1 two screws
2 Remove the panel (side L)
in the direction of the arrow.
– Rear view –
Note: Please spread a sheet under a unit
not to upper surface of the panel (front).
4 claw
4 claw
5 Remove the panel (front) block
2 three screws
(BV/ring)
MAP-S1
(flat head)
1 two screws
(flat head)
3 two claws
in the direction of the arrow.
3 Remove the panel (front) block
in the direction of the arrow.
13