Speakers - HP ENVY 15 Maintenance And Service Manual

Speakers

Table 5-5 Speaker spare part information
Description
Speakers (include left and right speakers and cables)
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see
5. Remove the battery (see
Remove the speakers:
1. Disconnect the speaker cable (1) from the system board.
2. Release the tape (1) that secures the speaker cable to the keyboard/top cover.
3. Release the pieces of tape (2) that secure the speaker cable to the keyboard/top cover.
4. Release the speaker cable from the routing clips (3) and channel built into the keyboard/top cover.
5. Remove the four Phillips M2.0×3.0 screws (4) that secure the speakers to the keyboard/top cover.
6. Remove the speakers (5).
Reverse this procedure to install the speakers.
34 Chapter 5 Removal and replacement procedures
Bottom cover on page
Battery on page 29).
27).
Spare part number
L97405-001