Specifications (Logic Analyzer) - HP 1660CP Series User Manual

Specifications (logic analyzer)

The specifications are the performance standards against which the product
is tested. Refer to the HP 1660C/CS/CP Logic Analyzers Service Guide
(available from your HP Sales Office) for testing procedures.
Maximum state speed
Minimum state clock pulse width
Minimum master-to-master clock time
Minimum glitch width*
Threshold accuracy
*
Setup/Hold Time:
Single clock, single edge
Single clock, multiple edges
Multiple clocks, multiple edges
* Specified for an input signal VH = −0.9 V, VL = −1.7 V, slew rate = 1 V/ns, and threshold = −1.3 V.
Specifications (logic analyzer)
100 MHz
*
3.5 ns
*
10.0 ns
3.5 ns
± (100 mV + 3% of threshold setting)
0.0/3.5 ns through 3.5/0.0 ns,
adjustable in 500-ps increments
0.0/4.0 ns through 4.0/0.0 ns,
adjustable in 500-ps increments
0.0/4.5 ns through 4.5/0.0 ns,
adjustable in 500-ps increments
Specifications
12–3