The Listing Menu; Markers - HP 1660CP Series User Manual

The Listing Menu

Markers

The Markers field accesses the markers selection menu. When the Markers
field is selected, a marker selection menu appears with the marker choices
appropriate for the present analyzer configuration.
Off
The Off selection turns off marker operations but does not turn off operations
based on the markers. For example, if a stop measurement was previously
specified and the stop measurement criteria are met, the measurement will
stop even though the markers are off.
Pattern markers
Pattern markers identify and mark unique bit patterns in the data listing.
Once the unique bit patterns are marked, you can use them as reference
points or as criteria for a stop measurement.
When a marker is positioned in the Listing menu, it is also positioned in the
Chart menu and Waveform menu, but not in the Mixed Display menu.
State analyzer markers
In a state analyzer with Count Off in the Trigger menu, only Pattern markers
are available. With Count Time turned on, Time markers and Statistics
markers become available. With Count States turned on, State markers
become available.
Timing analyzer markers
Timing analyzers always have marker choices of Pattern, Time, or Statistics.
Timing analyzers do not have state markers. The pattern markers, though,
can be used to count intervening patterns.
Stop measurement field
The stop measurement function specifies a condition that stops the analyzer
measurement during a repetitive run. If two analyzers are configured, both
analyzers stop when either specified stop condition is satisfied.
8-58