Maintenance Utility - Oki MC362w Maintenance Manual

Oki Data CONFIDENTIAL

5.3 Maintenance Utility

5.3.1 Maintenance Utility

The adjustments described in table 5-1 should be made by using Maintenance Utility.
The following details the utility:
(1) Maintenance Utility Operating Manuals:
42678801FU01 Rev.40 (Version 30.5) or higher (Japanese)
42678801FU02 Rev.40 (Version 30.5) or higher (English)
(2) Maintenance Utility program:
Applicable operating system
Win 2000/ XP/ Vista/ 7 (Japanese/
English)
Table 5-1: Adjustment options in Maintenance Utility
Option Adjustment
1 Board Copies information in the EEPROM in
replacement the PU block, and the settings in the
EEPROM in the CU block.
Purpose: To copy the above data onto
a CU/PU board with which to replace
the CU/PU board for a maintenance
purpose.
2 Serial Rewrites the serial number recorded in
number the PU block and selects and rewrites
setting the printer serial number recorded in
the CU block and rewrites the output
mode recorded in it.
Purpose: To configure a maintenance
replacement CU/PU board onto which
the CU/PU board information cannot
be copied with the board replacement
function (e.g. due to an interface error).
44952001TH Rev.2
File name Part number
MuWin.zip 42678801FW01 Rev.40 (Version
1.40.0) or higher
Section in Operation from
Maintenance operator panel
Utility (section in this
Operating maintenance
Manual manual)
2.4.1.1.9 Unavailable
2.4.1.1.10.3 Unavailable
Option Adjustment
3 Factory/ Switches between the Factory and
Shipping Shipping modes.
mode Purpose: To configure a maintenance
replacement CU/PU board onto which
the CU/PU board information cannot
be copied with the board replacement
function (e.g. due to an interface error).
The maintenance board is put to the
Factory mode usually by default and,
by using this function, must be set to
the Shipping mode.
4 Scanner Copies information in the EEPROM on
board the scanner board.
replacement Purpose : To copy the above data onto
a scanner board with which to replace
the scanner board for maintenance
purpose.
5 Board Checks serial number information and
option setup the Factory/Shipping mode.
information
6 USB Updates the USB software.
software
update
7 NIC software Updates the NIC software.
update
8 MAC Sets the MAC address.
address
setting
9 Consumable Copies the consumable counters:
counter Image drum counters (Y, M, C and K)
maintenance Fuser counter
function Belt counter
Toner counters (Y, M, C and K)
Purpose: To copy the counter value of
each consumable in use in the printer
to use in another printer.
5. MAINTENANCE MENUS
Section in Operation from
Maintenance operator panel
Utility (section in this
Operating maintenance
Manual manual)
2.4.1.1.10.4 5.3.2.10
2.4.1.1.8 Unavailable
2.4.1.1.7 Unavailable
2.4.2.2.1 Unavailable
2.4.2.2.17 Unavailable
2.4.2.2.5 Unavailable
2.4.1.2.1 Unavailable
5-10