Troubleshooting Method; Lcd Messages List - Oki MC362w Maintenance Manual

Oki Data CONFIDENTIAL

7.5 Troubleshooting method

If a trouble occurs in the printer, search for it by the following procedure:
Problem
generated
Problem is displayed
in LCD.
Abnormal image (or
problems that are
not displayed in the
LCD)
44952001TH Rev.2
Repair using the Repair in detail using
"LCD message list" troubleshooting flow
(see 7.5.1 to 7.5.3). (see 7.5.6).
Repair in detail using
troubleshooting flow
(see 7.5.6 to 7.5.8).

7.5.1 LCD messages list

Initializing & Shutdown
PJL
No. Category Status Error Warning
Code
1 Initializing - 1 Menu Resetting
2
3
4
5
2 Initializing - 1 Wait a moment.
2 Network initializing ...
3
4
5
7. TROUBLESHOOTING PROCEDURES
Description
Indicates that EEPROM of the
controller side is being reset.
The condition that EEPROM is
reset includes the followings.
- Changes of CU ROM (when
disagreement of CU F/W
version is detected)
- Changes of destination
channel
- Compulsive initialization of
EEPROM ("Service Menu"-
"System Maintenance"-"ALL
RESET")
- Reset by a FactoryDefaults
operator of PS
- OEM set of PJL command
The network is in initializing.
If this status occurred during
the unit initialinzing the
message is displayed by
English.
7-3