Connection Procedures - Oki MC362w Maintenance Manual

Oki Data CONFIDENTIAL

3.8 Connection Procedures

<USB Connection>
Prepare a USB Cable.
Note! • The cable of the MFP is not attached. Users should buy seperately.
• Obtain the cable of USB specification by yourself.
• Use the USB cable of Hi-Speed specification in case the connection is to be
made using "HI-Speed" mode of USB2.0.
Switch off the power of the
Memo Although the USB cable can be connected or removed with the switch of the
computer and printer on, switch off the power of the MFP at this step in order
to ensure installation of the MFP driver and USB driver later.
Connect the with the computer.
MFP
(1) Remove the interface cover on the right side of the machine while pressing the lock
button.
Lock button
44952001TH Rev.2
and computer.
MFP
Interface cover
(2) Plug one end of the USB cable into the USB connection on the back of the MFP .
(3) Hook the USB cable on the hook of the MFP .
Hook
(4) Attach the interface cover.
3. MFP INSTALLATION
3-24