Oki MC362w Maintenance Manual page 150

Oki Data CONFIDENTIAL
Item1 Item2 Item3
Password System Change
Maintenance Password
Check RTC
Save Syslog
Print Syslog
Panel Sound Test
Maintenance
Copy Color Copy
Maintenance
Print Check
Pattern
Scanner Scanner
Maintenance Calibration
Adjust Scan
Position
44952001TH Rev.2
Item4 Item5 Value
New Pass- ***********
word
Verify ************
Pass-word
Execute
Execute
Low
Middle
High
Enable
Disable
Execute
Execute
FBS Side Reg. +8 ~ -8
Front Edge +30 ~ -30
Default Default Default
value value value
ODA OEL JP
Set a new password for accessing the maintenance menu.
6 to 12 characters (numerals and lower-case alphabetic characters) may be entered.
Have the user enter the new password for accessing the maintenance menu, set
using "NEW PASSWORD," for confirmation purposes.
6 to 12 characters (numerals and lower-case alphabetic characters) may be entered.
Displays a snapshot of the current time. (The time does not change during display.)
Saves the network communication log (syslog) to nonvolatile memory.
Prints the network communication log (syslog).
Select the volume of the forced buzzer.
For the buzzer pattern, use the error sound (three buzzes)
Switches between enabling and disabling pressing the color start key during
copying.
If this is set to "disabled," presses on the color start key in copy mode will be
rejected by the panel.
Starts printing from the panel using a copy evaluation test chart inside the FW.
Starts execution of scanner calibration. Instead of being conducted automatically
after operating for a certain period of time, calibration is executed by the user as
needed. During calibration, the fact that calibration is underway is displayed.
Note: Also included under AdminSetting.
0 0 0
During book scanning, Adjusts the scanning start pixcel position for the main
scanning direction.
Adjust in intervals of one step = 4/600 dpi (=0.17 mm).
0 0 0 During book scanning, add a value for the basic value (= 5 mm) when reading the
shadow of the front edge of the document.
Adjust in intervals of one step = 4/600 dpi (=0.17 mm).
5. MAINTENANCE MENUS
Notes
5-3