Oki MC362w Maintenance Manual page 46

Oki Data CONFIDENTIAL
(5) Ejection unit and paper ejection
(a) Face-down ejection
Face-down ejection is available when the face-up tray is closed.
In that state, the separator FU is fixed in the direction illustrated in Figure
2-5, and the face-up tray detection sensor is enabled.
As the fuser motor runs (counterclockwise), the eject rollers and the heat
roller start rotating, and printed paper is ejected with its face down.
(b) Face-up ejection
Face-up ejection is available when the face-up tray is open.
In that state, the separator FU is fixed in the direction illustrated in Figure
2-6, and the face-up tray detection sensor is disabled.
As the fuser motor runs (clockwise), the eject rollers and the heat roller
start rotating, and printed paper is ejected with its face up. (When face-up
ejection is enabled, duplex printing is not available.)
44952001TH Rev.2
Eject roller (drive)
Face-up tray
detection sensor
Separator FU
Figure 2-5
Eject roller (drive)
Face-up tray
detection sensor
Separator FU
Figure 2-6
2. DESCRIPTION OF OPERATION
Fuser unit
Heat roller (drive)
Fuser motor
(counterclockwise)
Fuser unit
Heat roller (drive)
Fuser motor
(clockwise)
2-9