Fundamental Operations - Oki MC362w Maintenance Manual

Oki Data CONFIDENTIAL

2.3.1.3 Fundamental operations

Drive force trasmission diagram
The MFP is a document feed device of skim reading only.
Drive force diagram of the MFP is shown below.
[1]
[1] ADF board
[2] Document detection signal
[3] Regist clutch signal
[4] Document detection signal
44952001TH Rev.2
one way
[5] Feed and transport motor drive signal
[6] Feed clutch signal
[7] Document set signal
[8] Gear change solenoid signal
Overview of operation modes
There are four operation modes that are executed by the MFP. The respective operation
modes are executed in accordance with the instructions given by the connected equipment
to implement the print operation.
Name of the operation modes, the overview of the operation and the corresponding print
modes are shown in the following table.
Name of the operation Overview of the
modes operation
[1] Normal direction Document is fed
feed paper/Unload and scanned.
paper Upon completion of
scan, document is
unloaded as it is.
[2] Normal direction Document is fed
feed paper/ and scanned. Upon
Inverted unload completion of scan,
paper document is inverted
and unloaded.
2. DESCRIPTION OF OPERATION
Supporting print modes
Single-sided document Single-sided print
Single-sided document Both-sided print
(This operation is performed in both cases
when documents of same width and different
width are used.)
Both-sided document Both-sided print
Both-sided document single-sided print
(This operation is performed in both cases
when documents of same width and different
width are used.)
2-19