Kia CERATO Owner's Manual page 57

1. Place the Child Restraint System on
a rear seat and route the lap/
shoulder belt around or through
the Child Restraint System, follow‐
ing the Child Restraint System
manufacturer's instructions.
Make sure the seat belt webbing is
not twisted.
2. Fasten the lap/shoulder belt latch
into the buckle. Listen for the dis‐
tinct "click" sound. Position the re‐
lease button so that it is easy to
access in case of an emergency.
3. Remove as much slack from the
belt as possible by pushing down on
the Child Restraint System while
feeding the shoulder belt back into
the retractor.
4. Push and pull on the Child Restraint
System to confirm that the seat
belt is holding it firmly in place.
If your Child Restraint System manu‐
facturer recommends the use of a top-
tether with the lap/shoulder belt, see
"Top-tether Anchorage system" on
page 3-33.
To remove the Child Restraint System,
press the release button on the buckle
and then pull the lap/shoulder belt out
of the Child Restraint System and allow
the seat belt to retract fully.
Suitability of each seating position
for Belted & ISOFIX Child Restraint
Systems according to UN
regulations ( For Europe)
Based on R-16.06 ANNEX 17-Appen‐
Seating position
Seat posi‐
1 2 3 4
tion number
Seating po‐
sition suita‐
ble for uni‐ N/ N/ Ye Ye
versal bel‐ A A s s
ted (Yes /
No)
i-Size seat‐
N/ N/ N/ N
ing position
A A A o
(Yes / No)
Seating po‐
sition suita‐
N/ N/ N/ N
ble for lat‐
A A A o
eral fixture
(L1 / L2)
3
dix3
5 6
Ye
Yes
s
N/
No
A
N/
No
A
3-35