Download Print this page

Kia CERATO Owner's Manual page 165

Hide thumbs Also See for CERATO:

Advertisement

Turn Signal Indicator
Light
This indicator light blinks:
• When you turn the turn
signal light on.
If any of the following occurs, there
may a malfunction with the turn signal
system. In this case, have the vehicle
inspected by a professional workshop.
Kia recommends to visit an authorized
Kia dealer/service partner.
- The indicator light does not blink but
illuminates.
- The indicator light blinks more rapid‐
ly.
- The indicator light does not illuminate
at all.
Low Beam Indicator Light
(if equipped)
This indicator light illumi‐
nates:
• When the headlights are on.
High Beam Indicator
Light
This indicator light illumi‐
nates:
• When the headlights are on and in
the high beam position.
• When the turn signal lever is pulled
into the Flash-to-Pass position.
Light ON Indicator Light
This indicator light illumi‐
nates:
• When the tail lights or
headlights are on.
Front Fog Indicator Light
(if equipped)
This indicator light illumi‐
nates:
• When the front fog lights are on.
Rear Fog Indicator Light
(if equipped)
This indicator light illumi‐
nates:
• When the rear fog lights are on.
Glow Indicator Light
(Diesel Engine)
This indicator light illumi‐
nates:
• When the engine is being preheated
with the ignition switch or Engine
Start/Stop Button in the ON position.
- The engine can be started after
the glow indicator light goes off.
- The illumination time varies with
the engine coolant temperature,
air temperature, and battery con‐
dition.
If the indicator light remains on or
blinks after the engine has warmed up
or while driving, there may a malfunc‐
tion with the engine preheating sys‐
tem.
In this case, have the vehicle inspected
by a professional workshop. Kia recom‐
mends to visit an authorized Kia dealer/
service partner.
NOTICE
n Engine Preheating
If the engine does not start within
10 seconds after the preheating is
completed, set the ignition switch or
Engine Start/Stop Button to the
LOCK or OFF position for 10 seconds
and then to the ON position in order
to preheat the engine again.
4
4-79

Hide quick links:

Advertisement

loading

This manual is also suitable for:

Forte 2014