Kia CERATO Owner's Manual page 437

NOTICE
• When replacing fuse, turn the igni‐
tion "OFF" and turn off switches of
all electrical devices then remove
battery (-) terminal.
• The actual fuse/relay panel label
may differ from equipped items.
CAUTION
• When replacing a blown fuse or re‐
lay with a new one, make sure the
new fuse or relay fits tightly into
the clips. The incomplete fastening
fuse or relay may cause the vehi‐
cle wiring and electric systems
damage and a possible fire.
(Continued)
(Continued)
• Do not remove fuses, relays and
terminals fastened with bolts or
nuts. The fuses, relays and termi‐
nals may be fastened incomplete‐
ly, and it may cause a possible fire.
If fuses, relays and terminals fas‐
tened with bolts or nuts are blown,
consult a professional workshop.
Kia recommends to consult an au‐
thorized Kia dealer/service part‐
ner.
• Do not input any other objects ex‐
cept fuses or relays into fuse/relay
terminals such as a driver or wir‐
ing. It may cause contact failure
and system malfunction.
• Do not plug in screwdrivers or af‐
termarket wiring into the terminal
originally designed for fuse and re‐
lays only. The electrical system
and wiring of the vehicle interior
may be damaged or burned due to
contact failure.
• If you directly connect the wire on
the taillight or replace the bulb
which is over the regulated capaci‐
ty to install trailers etc., the inner
junction block can get burned.
CAUTION
Visually inspect the battery cap to
ensure it is securely closed. If the
battery cap is not securely closed,
moisture may enter the system and
damage the electrical components.
NOTICE
n Random wiring prohibited
when retrofitting equipment
Use of random wiring in the vehicle
might cause danger due to failure
and damage of the vehicle's per‐
formance.
Using random wires especially when
retrofitting AVN or theft alarm sys‐
tem, remote engine control, car
phone or radio might damage the
vehicle or cause fire.
NOTICE
n Remodeling Prohibited
(Continued)
8
8-67