Kia CERATO Owner's Manual page 221

• Rear seat
- The seat warmer defaults to the
OFF position whenever the ignition
switch is turned on.
• Temperature control(Automatic)
The seat warmer starts to automati‐
cally control the seat temperature in
order to prevent low-temperature
burns after being manually turned
ON.
You may manually press the button
to increase the seat temperature.
However, it soon returns to the auto‐
matic mode again.
- When pressing the switch for more
than 1.5 seconds with the seat
warmer operating, the seat warm‐
er will turn OFF.
- The seat warmer defaults to the
OFF position whenever the Engine
Start/Stop button is in the ON posi‐
tion.
NOTICE
With the seat warmer switch in the
ON position, the heating system in
(Continued)
(Continued)
the seat turns off or on automati‐
cally depending on the seat temper‐
ature.
CAUTION
• When cleaning the seats, do not
use an organic solvent such as
paint thinner, benzene, alcohol and
gasoline. Doing so may damage
the surface of the heater or seats.
• To prevent overheating the seat
warmer, do not place anything on
the seats that insulates against
heat, such as blankets, cushions or
seat covers while the seat warmer
is in operation.
• Do not place heavy or sharp ob‐
jects on seats equipped with seat
warmers. Damage to the seat
warming components could occur.
• Do not change the seat cover. It
may damage the seat warmer or
airventilation system.
4
4-135