Kia CERATO Owner's Manual page 41

Lap/shoulder belt
Height adjustment
You can adjust the height of the shoul‐
der belt anchor to one of 4 positions for
maximum comfort and safety.
The height of the adjusting seat belt
should not be too close to your neck.
You will not be getting the most effec‐
tive protection. The shoulder portion
should be adjusted so that it lies across
your chest and midway over your
shoulder near the door and not your
neck.
To adjust the height of the seat belt
anchor, lower or raise the height ad‐
juster into an appropriate position.
To raise the height adjuster, pull it up
(1). To lower it, push it down (3) while
pressing the height adjuster button (2).
Release the button to lock the anchor
into position. Try sliding the height ad‐
juster to make sure that it has locked
into position.
Improperly positioned seat belts can
cause serious injuries in an accident.
WARNING
• Verify the shoulder belt anchor is
locked into position at the appro‐
priate height. Never position the
shoulder belt across your neck or
face.
• Failure to replace seat belts after
an accident could leave you with
damaged seat belts that will not
provide protection in the event of
another collision leading to person‐
al injury or death. Replace your
seat belts after being in an acci‐
dent as soon as possible.
To fasten your seat belt:
To fasten your seat belt, pull it out of
the retractor and insert the metal tab
(1) into the buckle (2). There will be an
audible "click" when the tab locks into
the buckle.
The seat belt automatically adjusts to
the proper length only after the lap
belt portion is adjusted manually so
that it fits snugly around your hips. If
you lean forward in a slow, easy mo‐
tion, the belt will extend and let you
move around. If there is a sudden stop
or impact, however, the belt will lock in‐
to position. It will also lock if you try to
lean forward too quickly.
3
3-19