Kia CERATO Owner's Manual page 205

• When the third row's seat heater
button is turned ON, the third row's
climate and fan speed setting will au‐
tomatically follow the first row set‐
tings.
Adjusting the driver and passenger side
temperature individually
• Press the "SYNC" button again to ad‐
just the driver and passenger side
temperature individually. The illumi‐
nation of button turns off.
• Operate the driver side temperature
control knob to adjust the driver side
temperature.
• Operate the passenger side tempera‐
ture control knob to adjust the pas‐
senger side temperature.
Temperature conversion
You can switch the temperature mode
between Centigrade to Fahrenheit as
follows:
While pressing the OFF button, press
the AUTO button for 4 seconds or
more.
The display will change from Centi‐
grade to Fahrenheit, or from Fahrenheit
to Centigrade.
If the battery has been discharged or
disconnected, the temperature mode
display will reset to Centigrade.
Air intake control
This is used to select the outside
(fresh) air position or recirculated air
position.
To change the air intake control posi‐
tion, press the control button.
Recirculated air position
With the recirculated air
position selected, air
from the passenger
compartment will be
drawn through the heat‐
ing system and heated
or cooled according to
the function selected.
Outside (fresh) air position
With the outside (fresh)
air position selected, air
enters the vehicle from
outside and is heated or
cooled according to the
function selected.
NOTICE
Prolonged operation of the heater in
the recirculated air position (without
air conditioning selected) may cause
fogging of the windshield and side
windows and the air within the pas‐
senger compartment may become
stale.
In addition, prolonged use of the air
conditioning with the recirculated air
position selected will result in exces‐
sively dry air in the passenger com‐
partment.
4
4-119