Kia CERATO Owner's Manual page 280

Driving your vehicle
3. Press the engine start/stop button
while depressing the brake pedal.
4. Continue depressing the brake ped‐
al until the illuminated glow indica‐
tor goes off. (approximately
5 seconds)
5. The engine starts running when
the glow indicator goes off.
NOTICE
If the engine start/stop button is
pressed once more while the engine
is pre-heating, the engine may start.
6-14
Starting and stopping the engine
for turbocharger intercooler
1. Do not race or accelerate the en‐
gine immediately after starting.
If the engine is cold, idle for several
seconds before sufficient lubrica‐
tion is ensured in the turbocharger
unit.
2. After high speed or extended driv‐
ing, requiring a heavy engine load,
idle the engine about 1 minute be‐
fore turning it off.
This idle time will allow the turbo‐
charger to cool prior to shutting the
engine off.
CAUTION
Do not turn the engine off immedi‐
ately after it has been subjected to a
heavy load. Doing so may cause se‐
vere damage to the engine or turbo‐
charger unit.
Starting the engine with smart key
• Even if the smart key is in the vehicle,
if it is far away from you, the engine
may not start.
• When the engine start/stop button is
in the ACC position or above, if any
door is opened, the system checks
for the smart key. If the smart key is
not in the vehicle, the "
and a message "Key is not in the ve‐
hicle" will appear on the instrument
cluster and LCD window. And if all
doors are closed, the chime will sound
for 5 seconds. The indicator or warn‐
ing will turn off while the vehicle is
moving. Always have the smart key
with you.
WARNING
The engine will start, only when the
smart key is in the vehicle.
Never allow children or any person
who is unfamiliar with the vehicle
touch the engine start/stop button
or related parts.
CAUTION
If the engine stalls while the vehicle
is in motion, do not attempt to move
the shift lever to the P (Park) posi‐
(Continued)
" indicator