Kia CERATO Owner's Manual page 56

Safety features of your vehicle
1. Route the Child Restraint System
top-tether strap over the seatback.
Placing the top tether strap, please
follow the instructions of the Child
Restraint System manufacturer.
2. Connect the top-tether strap to
the top-tether anchorage, then
tighten the top-tether strap ac‐
cording to the instructions of your
Child Restraint System's manufac‐
turer to firmly attach the Child Re‐
straint System to the seat.
3-34
WARNING
Take the following precautions when
installing the top-tether:
• Read and follow all installation in‐
structions provided with your Child
Restraint System.
• NEVER attach more than one Child
Restraint System to a single ISO‐
FIX top-tether anchorage. This
could cause the anchorage or at‐
tachment to come loose or break.
• Do not attach the top-tether to
anything other than the correct
top-tether anchorage. It may not
work properly if attached
something else.
• Child Restraint System anchorages
are designed to withstand only
those loads imposed by correctly
fitted Child Restraint System.
Under no circumstances are they
to be used for adult seat belts or
harnesses or for attaching other
items or equipment to the vehicle.
Securing a Child Restraint System
with a lap/shoulder belt
When not using the ISOFIX system, all
Child Restraint Systems must be se‐
cured to a rear seat with the lap part of
a lap/shoulder belt.
to
Installing a Child Restraint System with
a lap/shoulder belt
To install a Child Restraint System on
the rear seats, do the following: