Status - Teledyne WIRELESS GROUNDLINK WQAR User Manual

STATUS

This menu allows the operator to display the current status of the hardware
inside the WQAR, each having its own sub-menu:
❖ ACQUISITION: Displays aspects of the flight data coming
into the WQAR from the acquisition unit:
➢ RAW: Displays how many frames of ARINC 717 data
have been received and how many have been recorded
on to the internal SD card.
➢ RATE: Displays the speed of the ARINC 717 data that the
WQAR expects. When the WQAR is in AUTO mode, the
correct rate will not be displayed until data is coming in.
This speed is expressed in Words per Second (WPS).
➢ SOURCE: Displays the type of signal the WQAR expects
from the acquisition unit when sending ARINC 717 data.
➢ MESSAGE: Displays whether ARINC429 message data
(report data) is recorded in the unit.
Use and disclosure shall be in accordance with the proprietary information notice and DCS on page i.
UG2243800-4XX
P a g e | 25
May 28, 2019