Diagnostics - Teledyne WIRELESS GROUNDLINK WQAR User Manual

DIAGNOSTICS

This menu allows the operator to perform testing on the WQAR. Some of
these tests should only be performed by Teledyne Controls engineering staff.
❖ DISPLAY TEST: Generates test patterns across the front
panel display. After the test is initiated, press the MODE
button to exit the test.
❖ ACQ SIMULATION: Allows the operator to test the
ability of the LRU to record by generating test data and
sending it to the data card. The test data is generated at
the speed (WPS) the LRU is configured to. After
initiated, this test will continue for 30 minutes or until
the test is terminated by pressing the MODE button. If
this test is left running long enough, the test data may
sent to the base station.
❖ RF INTERLCK TEST: Tests RF Interlock circuitry inside the
LRU. During this test, the radios are disabled.
❖ DISCRETE TESTS: The menu option allows the operator
to activate and deactivate the outgoing discretes:
MEDIA LOW and FAIL. Other discretes can be tested
here for future release.
Use and disclosure shall be in accordance with the proprietary information notice and DCS on page i.
UG2243800-4XX
P a g e | 28
May 28, 2019