Figure 7 indicates the data is now in-sync and will be recorded as valid data.
Figure 7 also shows that the WQAR has recorded ACMS report(s) by
displaying "MS". When data stops coming in, the top line will display
"RawStp" (not shown).
RawIn:SyncIn:MS
R_On
The bottom line has three sections separated by colons (:) which indicate the
other WQAR status:
❖ Left Section: Displays the cellular radio power status and
connection status.
➢ R_On: Radio(s) are powered on. Figures 4 thru 7 show
an example of this.
➢ R_Off: Radio(s) are powered off.
➢ CON: Connected. The WQAR has achieved a connection
with the WGCM.
➢ NO_CON: Displayed if a connection attempt fails.
➢ DN: Downloading. The WQAR is currently downloading
data to the base station.
➢ UP: Uploading. The WQAR is currently uploading data
from the base station.
Use and disclosure shall be in accordance with the proprietary information notice and DCS on page i.
UG2243800-4XX
:
Figure 7 – WQAR Display (Data in Sync)
P a g e
:IOff
May 28, 2019
| 19