Figure 21 Basic(Wep) Security; Table 13 Basic(Wep) Security - ZyXEL Communications P-335WT User Manual

Figure 21 Basic(WEP) Security

The following table describes the labels in this screen.

Table 13 Basic(WEP) Security

LABEL
Passphrase
WEP
Encryption
ASCII Select this option in order to enter ASCII characters as the WEP keys.
HEX Select this option to enter hexadecimal characters as the WEP keys.
Key 1 to Key 4 The WEP keys are used to encrypt data. Both the Prestige and the wireless stations
Back
Next
Chapter 3 Connection Wizard
DESCRIPTION
Type a Passphrase (up to 32 printable characters) and click Generate. The Prestige
automatically generates a WEP key.
Select 64-bit WEP, 128-bit WEP or 256-bit WEP to allow data encryption.
The preceding "0x" is entered automatically.
must use the same WEP key for data transmission.
If you chose 64-bit WEP, then enter any 5 ASCII characters or 10 hexadecimal
characters ("0-9", "A-F").
If you chose 128-bit WEP, then enter 13 ASCII characters or 26 hexadecimal
characters ("0-9", "A-F").
If you chose 256-bit WEP, then enter 29 ASCII characters or 58 hexadecimal
characters ("0-9", "A-F").
You must configure at least one key, only one key can be activated at any one time.
The default key is key 1.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
P-335 Series User's Guide
64