Non-Physical Features - ZyXEL Communications P-335WT User Manual

P-335 Series User's Guide
10/100 Mbps Auto-negotiating Ethernet/Fast Ethernet Interface(s)
This auto-negotiation feature allows the Prestige to detect the speed of incoming transmissions
and adjust appropriately without manual intervention. It allows data transfer of either 10 Mbps
or 100 Mbps in either half-duplex or full-duplex mode depending on your Ethernet network.
Auto-negotiation allows data transfer of 100 Mbps in full-duplex mode
Auto-crossover 10/100 Mbps Ethernet Interface(s)
These interfaces automatically adjust to either a crossover or straight-through Ethernet cable.
4-Port Switch
A combination of switch and router makes your Prestige a cost-effective and viable network
solution. You can add up to four computers to the Prestige without the cost of a hub. Add more
than four computers to your LAN by using a hub.
Reset Button
The Prestige reset button is built into the rear panel. Use this button to restore the factory
default password to 1234; IP address to 192.168.1.1, subnet mask to 255.255.255.0 and DHCP
server enabled with a pool of 32 IP addresses starting at 192.168.1.33.

1.2.2 Non-Physical Features

Print Server
The Prestige has a built-in print server that allows computers on the LAN to share a USB
printer. This eliminates the need to assign a dedicated computer as a print server or have a
standalone print server device.
Bandwidth Management
ZyXEL's Bandwidth Management allows you to specify bandwidth classes based on an
application and/or subnet. You can allocate specific amounts of bandwidth capacity
(bandwidth budgets) to different bandwidth classes.
Trend Micro Security Services
TMSS (Trend Micro Security Services) identifies vulnerabilities and protects computers
and networks that have Internet connections. TMSS is enabled by default on the Prestige
but you must register at the TMSS web page. After you register, you can configure TMSS
using the Prestige web configurator.
39 Chapter 1 Getting to Know Your Prestige