Table 3 Web Configurator Status Screen - ZyXEL Communications P-335WT User Manual

P-335 Series User's Guide
The following table describes the labels shown in the Status screen.

Table 3 Web Configurator Status Screen

LABEL
Device Information
System Name
Firmware Version
WAN Information
- IP Address
- IP Subnet Mask
- DHCP
LAN Information
- IP Address
- IP Subnet Mask
- DHCP
WLAN Information
- Name(SSID)
- Channel
- Security Mode
System Status
System Uptime
Current Date/Time
System Resource
- CPU Usage
- Memory Usage
Interface Status
Interface
Status
Rate
51
DESCRIPTION
This is the System Name you enter in the Maintenance, System, General screen. It
is for identification purposes.
This is the ZyNOS Firmware version and the date created. ZyNOS is ZyXEL's
proprietary Network Operating System design.
This shows the WAN port's IP address.
This shows the WAN port's subnet mask.
This shows the WAN port's DHCP role - Client or None.
This shows the LAN port's IP address.
This shows the LAN port's subnet mask.
This shows the LAN port's DHCP role - Server, Relay or None.
This shows a descriptive name used to identify the Prestige in the wireless LAN.
This shows the channel number which the Prestige uses over the wireless LAN.
This shows the level of wireless security the Prestige is using.
This is the total time the Prestige has been on.
This field displays your Prestige's present date and time along with the difference
from the Greenwich Mean Time (GMT) zone. The difference from GMT is based on
the time zone. It is also adjusted for Daylight Saving Time if you set the Prestige to
use it.
This number shows how many kilobytes of the heap memory the Prestige is using.
Heap memory refers to the memory that is not used by ZyNOS (ZyXEL Network
Operating System) and is thus available for running processes like NAT, VPN and the
firewall.
The bar displays what percent of the Prestige's heap memory is in use. The bar turns
from green to red when the maximum is being approached.
This number shows the Prestige's total heap memory (in kilobytes).
The bar displays what percent of the Prestige's heap memory is in use. The bar turns
from green to red when the maximum is being approached.
This displays the Prestige port types. The port types are: WAN, LAN and WLAN.
This field displays the port speed and duplex setting if you're using Ethernet
encapsulation and Down (line is down), Up (line is up or connected), Idle (line (ppp)
idle), Dial (starting to trigger a call) and Drop (dropping a call) if you're using PPPoE
encapsulation.
For the LAN ports, this displays the port speed and duplex setting.
For the WAN port, it displays the port speed and duplex setting if you're using
Ethernet encapsulation.
Chapter 2 Introducing the Web Configurator