Bandwidth Management Rule And Filter; Bandwidth Borrowing - ZyXEL Communications P-335WT User Manual

Table 87 Bandwidth Management Configuration
LABEL
Direction
Name
Service
Dest Port
Priority
Modify
Apply
Reset

16.3 Bandwidth Management Rule and Filter

Use the Bandwidth Management Rule Configuration screen to configure a bandwidth
management rule. Use bandwidth rules to allocate specific amounts of bandwidth capacity
(bandwidth budgets) to specific applications and/or subnets.

16.3.1 Bandwidth Borrowing

Enable bandwidth borrowing by selecting Use All Managed Bandwidth on a rule to allow the
rule to use any unused bandwidth. Unused bandwidth is given to the highest priority rule first.
To edit a bandwidth management rule, click the edit icon under Modify. The following screen
displays.
Chapter 16 Bandwidth Management
DESCRIPTION
Select To LAN to apply bandwidth management to traffic that the Prestige
forwards to the LAN.
Select To WAN to apply bandwidth management to traffic that the Prestige
forwards to the WAN.
Select To WLAN to apply bandwidth management to traffic that the Prestige
forwards to the WLAN.
Use the auto-generated name or enter a descriptive name of up to 20
alphanumeric characters, including spaces.
Select a service for your rule or you can define your own in the Edit screen.
Enter the port number of the destination. See
port numbers.
Select a priority from the drop down list box. Choose High, Mid or Low.
Click the Edit icon to open the address mapping rule screen. Modify an existing
rule or create a new rule in the Rule Setup screen.
Click the Remove icon to delete an address mapping rule.
Select a rule index number's radio button and then click Edit to set up this
bandwidth management rule on the Prestige.
Click Apply to save your customized settings.
Click Reset to begin configuring this screen afresh.
P-335 Series User's Guide
Table 86 for a list of services and
214