And Static Wep Key Exchange Screen - ZyXEL Communications P-335WT User Manual

Table 34 Wireless: 802.1x and Dynamic WEP
LABEL
Accounting Server
Active
IP Address
Port Number
Shared Secret
Apply
Reset
5.4.12 802.1x and Static WEP Key Exchange Screen
In order to configure and enable 802.1x and Static WEP Key Exchange; click the Wireless
LAN link under Network to display the Wireless screen. Select 802.1x + Static WEP from
the Security list.
Chapter 5 Wireless LAN (P-335WT)
DESCRIPTION
Select Yes from the drop down list box to enable user accounting through an
external authentication server.
Enter the IP address of the external accounting server in dotted decimal notation.
Enter the port number of the external accounting server. The default port number
is 1813.
You need not change this value unless your network administrator instructs you
to do so with additional information.
Enter a password (up to 31 alphanumeric characters) as the key to be shared
between the external accounting server and the Prestige.
The key must be the same on the external accounting server and your Prestige.
The key is not sent over the network.
Click Apply to save your changes back to the Prestige.
Click Reset to reload the previous configuration for this screen.
P-335 Series User's Guide
94