Security Settings; Wep Encryption; Figure 20 Security Setting: Wep; Table 5 Security Setting: Wep - ZyXEL Communications G-120 User Manual

Table 4 Site Survey (continued)
LABEL
MAC address
Surveyed at

4.2.1 Security Settings

When you configure the G-120 to connect to a network with wireless security activated and
the security settings are disabled on the G-120, the screen varies according to the encryption
method used by the selected network.

4.2.1.1 WEP Encryption

Figure 20 Security Setting: WEP

The following table describes the labels in this screen.

Table 5 Security Setting: WEP

LABEL
Security Setting
WEP
Encryption Type
Pass Phrase
Transmit Key
Chapter 4 ZyXEL Utility Configuration
DESCRIPTION
This field displays the MAC address of the wireless device.
This field displays the time when the wireless device is scanned.
DESCRIPTION
Select 64 Bits, 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Select an authentication method. Choices are Auto, Open System and Shared
Key.
Refer to Section 3.2.1.1.2 on page 31
Enter a passphrase of up to 63 case-sensitive printable characters. As you enter
the passphrase, the G-120 automatically generates four different WEP keys and
displays it in the key field below. Refer to
information.
At the time of writing, you cannot use passphrase to generate 256-bit WEP keys.
Select a default WEP key to use for data encryption. The key displays in the field
below.
ZyXEL G-120 User's Guide
for more information.
Section 3.2.1.1.1 on page 30 for more
41