Figure 124 Snmp Remote Management; Table 93 Snmp Remote Management - ZyXEL Communications P-335WT User Manual

P-335 Series User's Guide

Figure 124 SNMP Remote Management

The following table describes the labels in this screen.

Table 93 SNMP Remote Management

LABEL
SNMP Configuration
Get Community
Set Community
Trap Community
Trap Destination
SNMP
Service Port
Service Access
Secured Client IP
Address
Apply
Reset
225
DESCRIPTION
Enter the Get Community, which is the password for the incoming Get and
GetNext requests from the management station. The default is public and allows
all requests.
Enter the Set community, which is the password for incoming Set requests from
the management station. The default is public and allows all requests.
Type the trap community, which is the password sent with each trap to the
SNMP manager. The default is public and allows all requests.
Type the IP address of the station to send your SNMP traps to.
You may change the server port number for a service if needed, however you
must use the same port number in order to use that service for remote
management.
Select the interface(s) through which a computer may access the Prestige using
this service.
A secured client is a "trusted" computer that is allowed to communicate with the
Prestige using this service.
Select All to allow any computer to access the Prestige using this service.
Choose Selected to just allow the computer with the IP address that you specify
to access the Prestige using this service.
Click Apply to save your customized settings and exit this screen.
Click Reset to begin configuring this screen afresh.
Chapter 17 Remote Management Screens