Figure 72 Network > Nat > Trigger Port; Table 58 Network > Nat > Trigger Port - ZyXEL Communications P-2302HWUDL-P1 Series User Manual

Chapter 8 NAT
Figure 72 Network > NAT > Trigger Port
Each field is described in the following table.
Table 58 Network > NAT > Trigger Port
LABEL
Name
Incoming
Start Port
End Port
Trigger
Start Port
End Port
Apply
Cancel
128
DESCRIPTION
Enter a name to identify this rule. You can use 1 - 15 printable ASCII characters,
or you can leave this field blank. It does not have to be a unique name.
Enter the incoming port number or range of port numbers you want to forward to
the IP address the ZyXEL Device records.
To forward one port number, enter the port number in the Start Port and End Port
fields.
To forward a range of ports,
• enter the port number at the beginning of the range in the Start Port field
• enter the port number at the end of the range in the End Port field.
If you want to delete this rule, enter zero in the Start Port and End Port fields.
Enter the outgoing port number or range of port numbers that makes the ZyXEL
Device record the source IP address and assign it to the selected incoming port
number(s).
To select one port number, enter the port number in the Start Port and End Port
fields.
To select a range of ports,
• enter the port number at the beginning of the range in the Start Port field
• enter the port number at the end of the range in the End Port field.
If you want to delete this rule, enter zero in the Start Port and End Port fields.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to discard your changes.
P-2302HWUDL-P1 Series User's Guide