Notes On Otist; Figure 50 Otist: Settings; Figure 51 Otist: In Progress On The Wireless Device - ZyXEL Communications P-2302HWUDL-P1 Series User Manual

Chapter 5 Wireless LAN
You must click Start in the ZyXEL Device and in the wireless device(s) within
three minutes of each other. You can start OTIST in the wireless devices and
the ZyXEL Device in any order.
After you click Start in the ZyXEL Device, the following screen appears (in the ZyXEL
Device).

Figure 50 OTIST: Settings

You can use the key in this screen to set up WPA-PSK encryption manually for non-OTIST
devices in the wireless network.
Review the settings, and click OK. The ZyXEL Device begins transferring OTIST settings.
The following is an example screen that appears in the wireless devices.

Figure 51 OTIST: In Progress on the Wireless Device

This screen closes when the transfer is complete.

5.5.1 Notes on OTIST

1 If you enable OTIST in a wireless device, you see this screen each time you start the
utility. Click Yes to search for an OTIST-enabled AP (in other words, the ZyXEL
Device).
96
P-2302HWUDL-P1 Series User's Guide