Figure 16 Manually Assign A Wpa/Wpa2 Key; Table 8 Manually Assign A Wpa Or Wpa2 Key - ZyXEL Communications P-2302HWUDL-P1 Series User Manual

Table 7 Wireless LAN Setup Wizard 2
LABEL
Security
Back
Next
Exit
3.2.3.2 Manually Assign a WPA or WPA2 key
Choose Extend(WPA-PSK with customized key) or Extend(WPA2-PSK with customized
key) in the Wireless LAN setup screen to set up a Pre-Shared Key.

Figure 16 Manually Assign a WPA/WPA2 key

The following table describes the labels in this screen.

Table 8 Manually Assign a WPA or WPA2 key

LABEL
Pre-Shared
Key
Back
Next
Exit
P-2302HWUDL-P1 Series User's Guide
DESCRIPTION
Select Auto(WPA-PSK with self-generated key), if you want OTIST to configure a
WPA key for you.
Select Extend(WPA-PSK with customized key) or Extend(WPA2-PSK with
customized key) to configure a Pre-Shared Key (WPA-PSK). Choose this option only
if your wireless clients support WPA or WPA2. See
more information.
Select Basic(WEP) to configure a WEP Key. See
information.
Select None to have no wireless LAN security configured and your network is
accessible to any wireless networking device that is within range.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
DESCRIPTION
Type from 8 to 63 case-sensitive ASCII characters. You can set up the most secure
wireless connection by configuring WPA in the wireless LAN screens. You need to
configure an authentication server to do this.
Click Back to display the previous screen.
Click Next to proceed to the next screen.
Click Exit to close the wizard screen without saving.
Chapter 3 Wizard Setup
Section 3.2.3.2 on page 51
Section 3.2.3.3 on page 52
for
for more
51