Wan Internet Connection Screen (Roadrunner); Table 44 Network > Wan > Internet Connection (Ethernet) - ZyXEL Communications P-2302HWUDL-P1 Series User Manual

Chapter 6 WAN
Each field is described in the following table.
Table 44 Network > WAN > Internet Connection (Ethernet)
LABEL
ISP Parameters
for Internet
Access
Encapsulation
Service Type
WAN IP Address
Assignment
Get automatically
from ISP
Use Fixed IP
Address
IP Address
IP Subnet Mask
Gateway IP
Address
WAN MAC
Address
Spoof WAN MAC
Address
Clone the
computer's MAC
address - IP
Address
Apply
Cancel

6.2.2 WAN Internet Connection Screen (Roadrunner)

Use this screen to set up an Ethernet connection using Roadrunner service with the ISP. To
access this screen, click Network > WAN > Internet Connection.
104
DESCRIPTION
Select Ethernet. Ethernet encapsulation with Service Type set to Standard is
typically used if you are extending your existing network.
Select Standard.
Select this if your ISP did not assign you a static IP address or if you want another
DHCP server to assign an IP address to the ZyXEL Device.
Select this if your ISP assigned you a static IP address.
Enter the IP address provided by your ISP.
Enter the subnet mask provided by your ISP.
Enter the gateway provided by your ISP. If your ISP did not provide one, leave it
blank.
Select this if you do not want to use the default MAC address for the ZyXEL
Device.
This field is enabled if you select Spoof WAN MAC Address.
Enter the IP address of the computer whose MAC address you want the ZyXEL
Device to use instead of the default MAC address.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-2302HWUDL-P1 Series User's Guide