Packet Statistics Window - ZyXEL Communications P-2302HWUDL-P1 Series User Manual

Table 31 BW MGMT Monitor Window
LABEL
WAN-VoIP (SIP)
WAN-FTP
WAN-E-Mail
Default Class
WLAN-1
WLAN-VoIP (SIP)
WLAN-FTP
WLAN-E-Mail
WLAN-WWW
Default Class
Poll Interval
Set Interval
Stop

4.6 Packet Statistics Window

To access this screen, open the Status screen (see
...) next to Packet Statistics.
P-2302HWUDL-P1 Series User's Guide
DESCRIPTION
This field displays how much SIP traffic went to the WAN each second. The rate is
the number of kilobits that went to the WAN one second before the last time the
screen updated (refreshed).
This field displays how much FTP traffic went to the WAN each second. The rate
is the number of kilobits that went to the WAN one second before the last time the
screen updated (refreshed).
This field displays how much e-mail went to the WAN each second. The rate is the
number of kilobits that went to the WAN one second before the last time the
screen updated (refreshed).
This field displays how much traffic that is not allocated to any sub-class went to
the WAN each second. The rate is the number of kilobits that went to the WAN
one second before the last time the screen updated (refreshed). This might
include SIP traffic, FTP traffic, e-mail, or web traffic, depending on what traffic is
allocated to sub-classes. You can change what traffic is allocated to sub-classes
in Management > Bandwidth MGMT > Class Setup.
This field displays the total wireless traffic going through the ZyXEL Device.
This field displays how much SIP traffic went to the WLAN each second. The rate
is the number of kilobits that went to the WLAN one second before the last time
the screen updated (refreshed).
This field displays how much FTP traffic went to the WLAN each second. The rate
is the number of kilobits that went to the WLAN one second before the last time
the screen updated (refreshed).
This field displays how much e-mail traffic went to the WLAN each second. The
rate is the number of kilobits that went to the WLAN one second before the last
time the screen updated (refreshed).
This field displays how much web traffic went to the WLAN each second. The rate
is the number of kilobits that went to the WLAN one second before the last time
the screen updated (refreshed).
This field displays how much traffic that is not allocated to any sub-class went to
the WAN each second. The rate is the number of kilobits that went to the WAN
one second before the last time the screen updated (refreshed). This might
include SIP traffic, FTP traffic, e-mail, or web traffic, depending on what traffic is
allocated to sub-classes. You can change what traffic is allocated to sub-classes
in Management > Bandwidth MGMT > Class Setup.
Enter how often you want the ZyXEL Device to update this screen, and click Set
Interval.
Click this to make the ZyXEL Device update the screen based on the amount of
time you specified in Poll Interval.
Click this to make the ZyXEL Device stop updating the screen.
Chapter 4 Status Screens
Section 4.1 on page 71), and click (Details
79